Autor Wątek: linux-uksm w nowej, ulepszonej odsłonie  (Przeczytany 2130 razy)

0 użytkowników i 1 Gość przegląda ten wątek.

sir_lucjan

  • AUR-OR
  • Administrator
  • Ekspert
  • *****
  • Wiadomości: 1327
  • Reputacja +11/-0
  • Nic nie działa, jak Polska cała!
    • Mój profil w AUR
  • Architektura: x86_64
  • DE/WM: Plasma 5
  • Distro: Arch Linux
  • GPU: Intel
  • Kernel: linux-bfq-haswell
linux-uksm w nowej, ulepszonej odsłonie
« dnia: Grudzień 18, 2014, 19:33:41 »
Niestety, linux-uksm w AUR od dość dawna nie jest aktualizowany. Aktualnie (stan na dzień 18 grudnia 2014 roku) - mamy dostępną wersję 3.16.4. Jest to wersja nieco archaiczna - zważywszy na fakt, że aktualna wersja dla linux-uksm to 3.17.7 (patch dla wersji 3.18 jeszcze się nie ukazał). Postanowiłem nieco przerobić PKGBUILD dodając to, czego moim zdaniem w linux-uksm brakuje najbardziej - czyli https://github.com/graysky2/kernel_gcc_patch. PKGBUILD powinien być teraz nieco bardziej czytelny dzięki bardziej szczegółowym opisom możliwych do zastosowania opcji.

# Maintainer: Piotr Gorski <lucjan.lucjanov@gmail.com>
# Contributor: Felix Yan <felixonmars@gmail.com>
# Contributor: Kelvin Ng (qpalz) <kelvin9302104 at gmail dot com>
# Contributor: Tobias Powalowski <tpowa@archlinux.org>
# Contributor: Thomas Baechler <thomas@archlinux.org>

### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them

# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
_NUMAdisable=y

# Compile ONLY probed modules
# As of mainline 2.6.32, running with this option will only build the modules
# that you currently have probed in your system VASTLY reducing the number of
# modules built and the build time to do it.
#
# WARNING - ALL modules must be probed BEFORE you begin making the pkg!
#
# To keep track of which modules are needed for your specific system/hardware,
# give module_db script a try: https://aur.archlinux.org/packages/modprobed-db
# This PKGBUILD will call it directly to probe all the modules you have logged!
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed_db
_localmodcfg=

# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options.  NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
_use_current=

# Alternative I/O scheduler by Paolo.
# Set this if you want it enabled globally i.e. for all devices in your system
# If you want it enabled on a device-by-device basis, leave this unset and see:
# https://wiki.archlinux.org/index.php/Linux-ck#How_to_Enable_the_BFQ_I.2FO_Scheduler
_BFQ_enable_=

### Do no edit below this line unless you know what you're doing

pkgbase=linux-uksm
pkgname=('linux-uksm' 'linux-uksm-headers' 'linux-uksm-docs')
_kernelname=-uksm
_srcname=linux-3.17
pkgver=3.17.7
pkgrel=1
arch=('i686' 'x86_64')
url="http://kerneldedup.org/"
license=('GPL2')
options=('!strip')
makedepends=('kmod' 'inetutils' 'bc')
_uksmvernel="0.1.2.3"
_uksmname="v3.17.ge.2"
_bfqpath="http://algo.ing.unimo.it/people/paolo/disk_sched/patches/3.17.0-v7r6"
_bfqpath="https://pf.natalenko.name/mirrors/bfq/3.17.0-v7r6/"
_gcc_patch="enable_additional_cpu_optimizations_for_gcc_v4.9+_kernel_v3.15+.patch"

source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
        "http://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
        "http://kerneldedup.org/download/uksm/${_uksmvernel}/uksm-${_uksmvernel}-for-${_uksmname}.patch" # website often went down
        #"uksm-${_uksmvernel}-for-${_uksmname}.test.patch"
        "${_bfqpath}/0001-block-cgroups-kconfig-build-bits-for-BFQ-v7r6-3.17.patch"
        "${_bfqpath}/0002-block-introduce-the-BFQ-v7r6-I-O-sched-for-3.17.patch"
        "${_bfqpath}/0003-block-bfq-add-Early-Queue-Merge-EQM-to-BFQ-v7r6-for-3.17.0.patch"
        "http://repo-ck.com/source/gcc_patch/${_gcc_patch}.gz"
        'linux-uksm.preset'
        'change-default-console-loglevel.patch'
        '0001-x86-microcode-Update-BSPs-microcode-on-resume.patch'
        '0002-x86-microcode-Limit-the-microcode-reloading-to-64-bi.patch'
        'config' 'config.x86_64')
       
prepare() {
    cd ${_srcname}

    ### add upstream patch
    patch -Np1 -i "${srcdir}/patch-${pkgver}"
   
    ### set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
    # remove this when a Kconfig knob is made available by upstream
    # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
    msg "Patching set DEFAULT_CONSOLE_LOGLEVEL to 4"
    patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"

    # Fix FS#42689
# https://bugzilla.kernel.org/show_bug.cgi?id=88001
patch -p1 -i "${srcdir}/0001-x86-microcode-Update-BSPs-microcode-on-resume.patch"
         patch -p1 -i "${srcdir}/0002-x86-microcode-Limit-the-microcode-reloading-to-64-bi.patch"
   
 
    msg "Patching source with BFQ patches"
    for p in "${srcdir}"/000{1,2,3}-block*.patch; do
    patch -Np1 -i "$p"
    done

   
# Patch source to enable more gcc CPU optimizatons via the make nconfig
patch -Np1 -i "${srcdir}/${_gcc_patch}"


   
   ### Patch source with UKSM
    msg "Patching with UKSM"
    patch -Np1 -i "${srcdir}/uksm-${_uksmvernel}-for-${_uksmname}.patch"

    ### Clean tree and copy ARCH config over
    msg "Running make mrproper to clean source tree"
    make mrproper

    if [ "${CARCH}" = "x86_64" ]; then
        cat "${srcdir}/config.x86_64" > ./.config
    else
        cat "${srcdir}/config" > ./.config
    fi

    ### Optionally use running kernel's config
    # code originally by nous; http://aur.archlinux.org/packages.php?ID=40191
    if [ -n "$_use_current" ]; then
if [[ -s /proc/config.gz ]]; then
    msg "Extracting config from /proc/config.gz..."
    # modprobe configs
    zcat /proc/config.gz > ./.config
else
    warning "You kernel was not compiled with IKCONFIG_PROC!"
    warning "You cannot read the current config!"
    warning "Aborting!"
    exit
fi
    fi

    if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
    fi

    ### UKSM to be enabled
    sed -i -e s'/CONFIG_KSM=y/CONFIG_KSM=y\nCONFIG_UKSM=y/' ./.config

    ### BFQ to be compiled in but not enabled
    sed -i -e s'/CONFIG_CFQ_GROUP_IOSCHED=y/CONFIG_CFQ_GROUP_IOSCHED=y\nCONFIG_IOSCHED_BFQ=y\nCONFIG_CGROUP_BFQIO=y/' \
        -i -e s'/CONFIG_DEFAULT_CFQ=y/CONFIG_DEFAULT_CFQ=y\n# CONFIG_DEFAULT_BFQ is not set/' ./.config

    ### Optionally enable BFQ as the default io scheduler
    if [ -n "$_BFQ_enable_" ]; then
        sed -i -e '/CONFIG_DEFAULT_IOSCHED/ s,cfq,bfq,' \
        -i -e s'/CONFIG_DEFAULT_CFQ=y/# CONFIG_DEFAULT_CFQ is not set\nCONFIG_DEFAULT_BFQ=y/' ./.config
    fi

    ### Optionally set tickrate to 1000 to avoid suspend issues as reported here:
# http://ck-hack.blogspot.com/2013/09/bfs-0441-311-ck1.html?showComment=1379234249615#c4156123736313039413
if [ -n "$_1k_HZ_ticks" ]; then
msg "Setting tick rate to 1k..."
sed -i -e 's/^CONFIG_HZ_300=y/# CONFIG_HZ_300 is not set/' \
-i -e 's/^# CONFIG_HZ_1000 is not set/CONFIG_HZ_1000=y/' \
-i -e 's/^CONFIG_HZ=300/CONFIG_HZ=1000/' .config
fi
   
   
   
    # disable NUMA since 99.9% of users do not have multiple CPUs but do have multiple cores in one CPU
    # see, https://bugs.archlinux.org/task/31187
    if [ -n "$_NUMA_off" ]; then
if [ "${CARCH}" = "x86_64" ]; then
    sed -i -e 's/CONFIG_NUMA=y/# CONFIG_NUMA is not set/' \
    -i -e '/CONFIG_AMD_NUMA=y/d' \
    -i -e '/CONFIG_X86_64_ACPI_NUMA=y/d' \
    -i -e '/CONFIG_NODES_SPAN_OTHER_NODES=y/d' \
    -i -e '/# CONFIG_NUMA_EMU is not set/d' \
    -i -e '/CONFIG_NODES_SHIFT=6/d' \
    -i -e '/CONFIG_NEED_MULTIPLE_NODES=y/d' \
    -i -e '/CONFIG_USE_PERCPU_NUMA_NODE_ID=y/d' \
    -i -e '/CONFIG_ACPI_NUMA=y/d' ./.config
fi
    fi

    # set extraversion to pkgrel
    sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile

    # don't run depmod on 'make install'. We'll do this ourselves in packaging
    sed -i '2iexit 0' scripts/depmod.sh

    # get kernel version
    yes ""|make oldconfig
   
   
    # get kernel version
    msg "Running make prepare for you to enable patched options of your choosing"
    make prepare

    ### Optionally load needed modules for the make localmodconfig
    # See http://aur.archlinux.org/packages.php?ID=41689
    if [ -n "$_localmodcfg" ]; then
msg "If you have modprobe_db installed, running it in recall mode now"
if [ -e /usr/bin/modprobed_db ]; then
    [[ ! -x /usr/bin/sudo ]] && echo "Cannot call modprobe with sudo. Install via pacman -S sudo and configure to work with this user." && exit 1
    sudo /usr/bin/modprobed_db recall
fi
msg "Running Steven Rostedt's make localmodconfig now"
make localmodconfig
    fi

    if [ -n "$_makenconfig" ]; then
msg "Running make nconfig"
make nconfig
    fi
   
    # rewrite configuration
yes "" | make config >/dev/null

# save configuration for later reuse
if [ "${CARCH}" = "x86_64" ]; then
cat .config > "${startdir}/config.x86_64.last"
else
cat .config > "${startdir}/config.last"
fi
   
}

build() {
    cd ${_srcname}
    # Tweak kernel options prior to a build via gconfig
    #make  gconfig
    # Tweak kernel options prior to a build via xconfig
    #make xconfig
    # Tweak kernel options prior to a build via nconfig
    # make nconfig
    msg "Running make bzImage and modules"
    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
}

package_linux-uksm() {
    pkgdesc='Linux Kernel and modules with the UKSM patchset featuring the  v1.2.3 and BFQ & BFS schedulers.'
    depends=('coreutils' 'linux-firmware' 'mkinitcpio>=0.7')
    optdepends=('crda' 'nvidia-uksm' 'modprobed-db')
    backup=("etc/mkinitcpio.d/linux-uksm.preset")
    install=linux-uksm.install

    cd ${_srcname}

    KARCH=x86

    # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}

    mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
    make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
    cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-linux-uksm"

    # set correct depmod command for install
    cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
    true && install=${install}.pkg
    sed \
    -e "s/KERNEL_NAME=.*/KERNEL_NAME=-uksm/g" \
    -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
    -i "${startdir}/${install}"

    # install mkinitcpio preset file for kernel
    install -D -m644 "${srcdir}/linux-uksm.preset" "${pkgdir}/etc/mkinitcpio.d/linux-uksm.preset"
    sed \
    -e "1s|'linux.*'|'linux-uksm'|" \
    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-linux-uksm\"|" \
    -e "s|default_image=.*|default_image=\"/boot/initramfs-linux-uksm.img\"|" \
    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-linux-uksm-fallback.img\"|" \
    -i "${pkgdir}/etc/mkinitcpio.d/linux-uksm.preset"

    # remove build and source links
    rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
    # remove the firmware
    rm -rf "${pkgdir}/lib/firmware"
    # gzip -9 all modules to save 100MB of space
    find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
    # make room for external modules
    ln -s "../extramodules-${_basekernel}${_kernelname:bridge-pl}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
    # add real version for building modules and running depmod from post_install/upgrade
    mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:bridge-pl}"
    echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:bridge-pl}/version"

    # Now we call depmod...
    depmod -b "${pkgdir}" -F System.map "${_kernver}"

    # move module tree /lib -> /usr/lib
    mkdir -p "${pkgdir}/usr"
    mv "${pkgdir}/lib" "${pkgdir}/usr/"

    # add vmlinux
    install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
}

package_linux-uksm-headers() {
    pkgdesc='Header files and scripts to build modules for linux-uksm.'
    depends=('linux-uksm')

    install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"

    cd ${_srcname}
   
    KARCH=x86
   
     # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}

   
    install -D -m644 Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
    install -D -m644 kernel/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
    install -D -m644 .config \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"

    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"

    for i in acpi asm-generic config crypto drm generated keys linux math-emu \
    media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
    done

    # copy arch includes for external modules
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
    cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"

    # copy files necessary for later builds, like nvidia and vmware
    cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
    cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"

    # fix permissions on scripts dir
    chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"

    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"

    cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"

    if [ "${CARCH}" = "i686" ]; then
    cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
    fi

    cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"

    # add docbook makefile
    install -D -m644 Documentation/DocBook/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"

    # add dm headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
    cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"

    # add inotify.h
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
    cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"

    # add wireless headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
    cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"

    # add dvb headers for external modules
    # in reference to:
    # http://bugs.archlinux.org/task/9912
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
    cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
    # and...
    # http://bugs.archlinux.org/task/11194
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
    [[ -e include/config/dvb/ ]] && cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"

    # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
    # in reference to:
    # http://bugs.archlinux.org/task/13146
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
    cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"

    # add dvb headers
    # in reference to:
    # http://bugs.archlinux.org/task/20402
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
    cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
    cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
    cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"

    # add xfs and shmem for aufs building
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
    # removed in 3.17 series
    # cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"

    # copy in Kconfig files
    for i in `find . -name "Kconfig*"`; do
    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
    done

    chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
    find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;

    # strip scripts directory
    find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
    case "$(file -bi "${binary}")" in
    *application/x-sharedlib*) # Libraries (.so)
    /usr/bin/strip ${STRIP_SHARED} "${binary}";;
    *application/x-archive*) # Libraries (.a)
    /usr/bin/strip ${STRIP_STATIC} "${binary}";;
    *application/x-executable*) # Binaries
    /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
    esac
    done

    # remove unneeded architectures
    rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
}

package_linux-uksm-docs() {
  pkgdesc="Kernel hackers manual - HTML documentation that comes with the linux-uksm kernel"
  depends=('linux-uksm')
 
 
  cd ${_srcname}

    KARCH=x86

    # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}

  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
  cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
  find "${pkgdir}" -type f -exec chmod 444 {} \;
  find "${pkgdir}" -type d -exec chmod 755 {} \;

  # remove a file already in linux package
  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
}


sha512sums=('29c99764e371f7005dbbe2bbe4458b4deeae5297da7e5b719b0f29f6f018629338b608369162ae6bd76bec4d8719cf491257ac57fdd5277cce8941b7f90246a0'
            'f7b102094fafa2754fd1b15f2c18d8b86e536f691887e375c1416d424544da358c31e45ed15520053ece1f8a3181385a633a6df16ac4e5b033fa72e21a286449'
            '8dd4c2bc3220f841055e0def970b01896b8d01021a5ac9b359075202c73f5da736a48e441d5b8b59306e70e8a1fd11a772beeab9a73a302c71346cc2a3f11257'
            '4699780642d97f2a98e82bcaed4dd348a444dd17a908d84332a7423fec08fc715a96edcf45ec107f08279da89cc0800d0062162135135b1b467a2afbb3a6be32'
            'ef69eac3bb620be4cad6988efc9161d58337bb7934f9a12aeb76392a3a308accd2b3cb56324c5c2a061781b98d160d501586b5c575a41f0596905022a936a2a9'
            '5099ed226864a13df097256bd80caa09f0d5aea7d832fae72481bfebfad92824019a2762ba5f870a2b072eb2ffaaa9311021e3ea9efda3244b4c17dcf2a9e311'
            'bdf5fbd0f7b674be9e4c5004d54bd91c7cc82f80b0ad2c534b62bd39b52b1ad6a2694bd645a208dcd1eb1e03e64d60e71bf605e096c69e497cdeda00534cbcc7'
            '274c592f48eba59dc1423ecd926859eb87fbb6ad3431415ed79bcfbaeae59a71d09669edfc4d217ec9ff39da42af21c8a55ceb4d6463c288d3c5f470b19184e8'
            'd9d28e02e964704ea96645a5107f8b65cae5f4fb4f537e224e5e3d087fd296cb770c29ac76e0ce95d173bc420ea87fb8f187d616672a60a0cae618b0ef15b8c8'
            'fc548351593137def408beebb23e3b0fe9de638c7f708ef3c0ef23d8880dd7d083d5d0be4772338bca2947d9bcf394749f17035679316256ffeab7d1cae89249'
            '313f9155bad37f8c98f79c0c776e6a0457b56597c8cff5dcd6c1bfa0377118e90e5a79f36c53dd10fd59821f2465333ea2fcf3064ae0b2243c4c6685f9954cc5'
            '026069822b0217af9b00c819228d2483661ad23b8d4a7e66d8b7b2c3809de875f684f5a527e9f159eae24bf18df6ea7452c03be21d8ae54c94742796c2c15690'
            '7e0522b71bed6e1c43c8548a106a05bd6ce6aeb3f60c2630432ef4b4b5bf649ffdeccef237e75f802ea491a74f51010ea231ca6168e74412b7f9486fa4dd6aed')

Pliki 0001-x86-microcode-Update-BSPs-microcode-on-resume.patch oraz 0002-x86-microcode-Limit-the-microcode-reloading-to-64-bi.patch możecie pobrać z tarballi linux-bridge-pl oraz linux-uksm-ck. Pozostałe źródła z tarballa linux-uksm nie wymagają modyfikacji.
« Ostatnia zmiana: Grudzień 22, 2014, 09:39:26 wysłana przez sir_lucjan »
Dell Inspiron 15-3542 (3542-2538) || Linux Register User: #536661
[AUR]  [GitHub]

sir_lucjan

  • AUR-OR
  • Administrator
  • Ekspert
  • *****
  • Wiadomości: 1327
  • Reputacja +11/-0
  • Nic nie działa, jak Polska cała!
    • Mój profil w AUR
  • Architektura: x86_64
  • DE/WM: Plasma 5
  • Distro: Arch Linux
  • GPU: Intel
  • Kernel: linux-bfq-haswell
Odp: linux-uksm 3.17 w nowej, ulepszonej odsłonie
« Odpowiedź #1 dnia: Grudzień 18, 2014, 21:59:31 »
Zapomniałem o plikach config.

config - http://wklej.org/id/1562177/

config.x86_64 - http://wklej.org/id/1562178/
Dell Inspiron 15-3542 (3542-2538) || Linux Register User: #536661
[AUR]  [GitHub]

sir_lucjan

  • AUR-OR
  • Administrator
  • Ekspert
  • *****
  • Wiadomości: 1327
  • Reputacja +11/-0
  • Nic nie działa, jak Polska cała!
    • Mój profil w AUR
  • Architektura: x86_64
  • DE/WM: Plasma 5
  • Distro: Arch Linux
  • GPU: Intel
  • Kernel: linux-bfq-haswell
Odp: linux-uksm w nowej, ulepszonej odsłonie
« Odpowiedź #2 dnia: Grudzień 22, 2014, 09:42:57 »
Zaktualizowałem swoja wersję linux-uksm do wersji 3.18.1

# Maintainer: Piotr Gorski <sir_lucjan@openlinux.pl>
# Contributor: Felix Yan <felixonmars@gmail.com>
# Contributor: Kelvin Ng (qpalz) <kelvin9302104 at gmail dot com>
# Contributor: Tobias Powalowski <tpowa@archlinux.org>
# Contributor: Thomas Baechler <thomas@archlinux.org>

### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them

# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
_NUMAdisable=y

# Compile ONLY probed modules
# As of mainline 2.6.32, running with this option will only build the modules
# that you currently have probed in your system VASTLY reducing the number of
# modules built and the build time to do it.
#
# WARNING - ALL modules must be probed BEFORE you begin making the pkg!
#
# To keep track of which modules are needed for your specific system/hardware,
# give module_db script a try: https://aur.archlinux.org/packages/modprobed-db
# This PKGBUILD will call it directly to probe all the modules you have logged!
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed_db
_localmodcfg=

# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options.  NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
_use_current=

# Alternative I/O scheduler by Paolo.
# Set this if you want it enabled globally i.e. for all devices in your system
# If you want it enabled on a device-by-device basis, leave this unset and see:
# https://wiki.archlinux.org/index.php/Linux-ck#How_to_Enable_the_BFQ_I.2FO_Scheduler
_BFQ_enable_=

### Do no edit below this line unless you know what you're doing

pkgbase=linux-uksm
pkgname=('linux-uksm' 'linux-uksm-headers' 'linux-uksm-docs')
_kernelname=-uksm
_srcname=linux-3.18
pkgver=3.18.1
pkgrel=1
arch=('i686' 'x86_64')
url="http://kerneldedup.org/"
license=('GPL2')
options=('!strip')
makedepends=('kmod' 'inetutils' 'bc')
_uksmvernel="0.1.2.3"
_uksmname="v3.18"
_bfqpath="http://algo.ing.unimo.it/people/paolo/disk_sched/patches/3.18.0-v7r6"
_bfqpath="https://pf.natalenko.name/mirrors/bfq/3.18.0-v7r6/"
_gcc_patch="enable_additional_cpu_optimizations_for_gcc_v4.9+_kernel_v3.15+.patch"

source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
        "http://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
        "http://kerneldedup.org/download/uksm/${_uksmvernel}/uksm-${_uksmvernel}-for-${_uksmname}.patch" # website often went down
        #"uksm-${_uksmvernel}-for-${_uksmname}.test.patch"
        "${_bfqpath}/0001-block-cgroups-kconfig-build-bits-for-BFQ-v7r6-3.18.patch"
        "${_bfqpath}/0002-block-introduce-the-BFQ-v7r6-I-O-sched-for-3.18.patch"
        "${_bfqpath}/0003-block-bfq-add-Early-Queue-Merge-EQM-to-BFQ-v7r6-for-3.18.0.patch"
        "http://repo-ck.com/source/gcc_patch/${_gcc_patch}.gz"
        'linux-uksm.preset'
        'change-default-console-loglevel.patch'
        '0001-drm-i915-Disallow-pin-ioctl-completely-for-kms-drive.patch'
        'config' 'config.x86_64')
       
prepare() {
    cd ${_srcname}

    ### add upstream patch
    patch -Np1 -i "${srcdir}/patch-${pkgver}"
   
    ### set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
    # remove this when a Kconfig knob is made available by upstream
    # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
    msg "Patching set DEFAULT_CONSOLE_LOGLEVEL to 4"
    patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"

    # fix FS#43143
patch -p1 -i "${srcdir}/0001-drm-i915-Disallow-pin-ioctl-completely-for-kms-drive.patch"
 
    msg "Patching source with BFQ patches"
    for p in "${srcdir}"/000{1,2,3}-block*.patch; do
    patch -Np1 -i "$p"
    done

   
# Patch source to enable more gcc CPU optimizatons via the make nconfig
patch -Np1 -i "${srcdir}/${_gcc_patch}"


   
   ### Patch source with UKSM
    msg "Patching with UKSM"
    patch -Np1 -i "${srcdir}/uksm-${_uksmvernel}-for-${_uksmname}.patch"

    ### Clean tree and copy ARCH config over
    msg "Running make mrproper to clean source tree"
    make mrproper

    if [ "${CARCH}" = "x86_64" ]; then
        cat "${srcdir}/config.x86_64" > ./.config
    else
        cat "${srcdir}/config" > ./.config
    fi

    ### Optionally use running kernel's config
    # code originally by nous; http://aur.archlinux.org/packages.php?ID=40191
    if [ -n "$_use_current" ]; then
if [[ -s /proc/config.gz ]]; then
    msg "Extracting config from /proc/config.gz..."
    # modprobe configs
    zcat /proc/config.gz > ./.config
else
    warning "You kernel was not compiled with IKCONFIG_PROC!"
    warning "You cannot read the current config!"
    warning "Aborting!"
    exit
fi
    fi

    if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
    fi

    ### UKSM to be enabled
    sed -i -e s'/CONFIG_KSM=y/CONFIG_KSM=y\nCONFIG_UKSM=y/' ./.config

    ### BFQ to be compiled in but not enabled
    sed -i -e s'/CONFIG_CFQ_GROUP_IOSCHED=y/CONFIG_CFQ_GROUP_IOSCHED=y\nCONFIG_IOSCHED_BFQ=y\nCONFIG_CGROUP_BFQIO=y/' \
        -i -e s'/CONFIG_DEFAULT_CFQ=y/CONFIG_DEFAULT_CFQ=y\n# CONFIG_DEFAULT_BFQ is not set/' ./.config

    ### Optionally enable BFQ as the default io scheduler
    if [ -n "$_BFQ_enable_" ]; then
        sed -i -e '/CONFIG_DEFAULT_IOSCHED/ s,cfq,bfq,' \
        -i -e s'/CONFIG_DEFAULT_CFQ=y/# CONFIG_DEFAULT_CFQ is not set\nCONFIG_DEFAULT_BFQ=y/' ./.config
    fi

    ### Optionally set tickrate to 1000 to avoid suspend issues as reported here:
# http://ck-hack.blogspot.com/2013/09/bfs-0441-311-ck1.html?showComment=1379234249615#c4156123736313039413
if [ -n "$_1k_HZ_ticks" ]; then
msg "Setting tick rate to 1k..."
sed -i -e 's/^CONFIG_HZ_300=y/# CONFIG_HZ_300 is not set/' \
-i -e 's/^# CONFIG_HZ_1000 is not set/CONFIG_HZ_1000=y/' \
-i -e 's/^CONFIG_HZ=300/CONFIG_HZ=1000/' .config
fi
   
   
   
    # disable NUMA since 99.9% of users do not have multiple CPUs but do have multiple cores in one CPU
    # see, https://bugs.archlinux.org/task/31187
    if [ -n "$_NUMA_off" ]; then
if [ "${CARCH}" = "x86_64" ]; then
    sed -i -e 's/CONFIG_NUMA=y/# CONFIG_NUMA is not set/' \
    -i -e '/CONFIG_AMD_NUMA=y/d' \
    -i -e '/CONFIG_X86_64_ACPI_NUMA=y/d' \
    -i -e '/CONFIG_NODES_SPAN_OTHER_NODES=y/d' \
    -i -e '/# CONFIG_NUMA_EMU is not set/d' \
    -i -e '/CONFIG_NODES_SHIFT=6/d' \
    -i -e '/CONFIG_NEED_MULTIPLE_NODES=y/d' \
    -i -e '/CONFIG_USE_PERCPU_NUMA_NODE_ID=y/d' \
    -i -e '/CONFIG_ACPI_NUMA=y/d' ./.config
fi
    fi

    # set extraversion to pkgrel
    sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile

    # don't run depmod on 'make install'. We'll do this ourselves in packaging
    sed -i '2iexit 0' scripts/depmod.sh

    # get kernel version
    yes ""|make oldconfig
   
   
    # get kernel version
    msg "Running make prepare for you to enable patched options of your choosing"
    make prepare

    ### Optionally load needed modules for the make localmodconfig
    # See http://aur.archlinux.org/packages.php?ID=41689
    if [ -n "$_localmodcfg" ]; then
msg "If you have modprobe_db installed, running it in recall mode now"
if [ -e /usr/bin/modprobed_db ]; then
    [[ ! -x /usr/bin/sudo ]] && echo "Cannot call modprobe with sudo. Install via pacman -S sudo and configure to work with this user." && exit 1
    sudo /usr/bin/modprobed_db recall
fi
msg "Running Steven Rostedt's make localmodconfig now"
make localmodconfig
    fi

    if [ -n "$_makenconfig" ]; then
msg "Running make nconfig"
make nconfig
    fi
   
    # rewrite configuration
yes "" | make config >/dev/null

# save configuration for later reuse
if [ "${CARCH}" = "x86_64" ]; then
cat .config > "${startdir}/config.x86_64.last"
else
cat .config > "${startdir}/config.last"
fi
   
}

build() {
    cd ${_srcname}
    # Tweak kernel options prior to a build via gconfig
    #make  gconfig
    # Tweak kernel options prior to a build via xconfig
    #make xconfig
    # Tweak kernel options prior to a build via nconfig
    # make nconfig
    msg "Running make bzImage and modules"
    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
}

package_linux-uksm() {
    pkgdesc='Linux Kernel and modules with the UKSM patchset featuring the  v1.2.3 and BFQ & BFS schedulers.'
    depends=('coreutils' 'linux-firmware' 'mkinitcpio>=0.7')
    optdepends=('crda' 'nvidia-uksm' 'modprobed-db')
    backup=("etc/mkinitcpio.d/linux-uksm.preset")
    install=linux-uksm.install

    cd ${_srcname}

    KARCH=x86

    # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}

    mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
    make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
    cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-linux-uksm"

    # set correct depmod command for install
    cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
    true && install=${install}.pkg
    sed \
    -e "s/KERNEL_NAME=.*/KERNEL_NAME=-uksm/g" \
    -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
    -i "${startdir}/${install}"

    # install mkinitcpio preset file for kernel
    install -D -m644 "${srcdir}/linux-uksm.preset" "${pkgdir}/etc/mkinitcpio.d/linux-uksm.preset"
    sed \
    -e "1s|'linux.*'|'linux-uksm'|" \
    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-linux-uksm\"|" \
    -e "s|default_image=.*|default_image=\"/boot/initramfs-linux-uksm.img\"|" \
    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-linux-uksm-fallback.img\"|" \
    -i "${pkgdir}/etc/mkinitcpio.d/linux-uksm.preset"

    # remove build and source links
    rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
    # remove the firmware
    rm -rf "${pkgdir}/lib/firmware"
    # gzip -9 all modules to save 100MB of space
    find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
    # make room for external modules
    ln -s "../extramodules-${_basekernel}${_kernelname:bridge-pl}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
    # add real version for building modules and running depmod from post_install/upgrade
    mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:bridge-pl}"
    echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:bridge-pl}/version"

    # Now we call depmod...
    depmod -b "${pkgdir}" -F System.map "${_kernver}"

    # move module tree /lib -> /usr/lib
    mkdir -p "${pkgdir}/usr"
    mv "${pkgdir}/lib" "${pkgdir}/usr/"

    # add vmlinux
    install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
}

package_linux-uksm-headers() {
    pkgdesc='Header files and scripts to build modules for linux-uksm.'
    depends=('linux-uksm')

    install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"

    cd ${_srcname}
   
    KARCH=x86
   
     # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}

   
    install -D -m644 Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
    install -D -m644 kernel/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
    install -D -m644 .config \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"

    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"

    for i in acpi asm-generic config crypto drm generated keys linux math-emu \
    media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
    done

    # copy arch includes for external modules
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
    cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"

    # copy files necessary for later builds, like nvidia and vmware
    cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
    cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"

    # fix permissions on scripts dir
    chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"

    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"

    cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"

    if [ "${CARCH}" = "i686" ]; then
    cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
    fi

    cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"

    # add docbook makefile
    install -D -m644 Documentation/DocBook/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"

    # add dm headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
    cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"

    # add inotify.h
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
    cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"

    # add wireless headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
    cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"

    # add dvb headers for external modules
    # in reference to:
    # http://bugs.archlinux.org/task/9912
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
    cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
    # and...
    # http://bugs.archlinux.org/task/11194
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
    [[ -e include/config/dvb/ ]] && cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"

    # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
    # in reference to:
    # http://bugs.archlinux.org/task/13146
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
    cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"

    # add dvb headers
    # in reference to:
    # http://bugs.archlinux.org/task/20402
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
    cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
    cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
    cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"

    # add xfs and shmem for aufs building
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
    # removed in 3.17 series
    # cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"

    # copy in Kconfig files
    for i in `find . -name "Kconfig*"`; do
    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
    done

    chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
    find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;

    # strip scripts directory
    find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
    case "$(file -bi "${binary}")" in
    *application/x-sharedlib*) # Libraries (.so)
    /usr/bin/strip ${STRIP_SHARED} "${binary}";;
    *application/x-archive*) # Libraries (.a)
    /usr/bin/strip ${STRIP_STATIC} "${binary}";;
    *application/x-executable*) # Binaries
    /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
    esac
    done

    # remove unneeded architectures
    rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
}

package_linux-uksm-docs() {
  pkgdesc="Kernel hackers manual - HTML documentation that comes with the linux-uksm kernel"
  depends=('linux-uksm')
 
 
  cd ${_srcname}

    KARCH=x86

    # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}

  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
  cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
  find "${pkgdir}" -type f -exec chmod 444 {} \;
  find "${pkgdir}" -type d -exec chmod 755 {} \;

  # remove a file already in linux package
  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
}


sha512sums=('2f0b72466e9bc538a675738aa416573d41bbbd7e3e2ffd5b5b127afde609ebc278cec5a3c37e73479607e957c13f1b4ed9782a3795e0dcc2cf8e550228594009'
            '3c83cbf12a0c68607405ab253a85ef792d00bdca563a538069a5d4628d31dd0391ea4b4302cdd38cf5f5d6c7455df94ecd5d2ba77a5148e35d646c03bec3a31f'
            'b99dbb7b21b443dbf107a628255f216db8c86f936956fae6a21c74510be1be32cf9e45318fc5cf865e9272e80ec4d246f252b22560fea6799040582f4082163b'
            '58b7aa96279ac5989a74f5eb63bd6b2c827bb29a981452617cacc3b5fd5d84b22f65af07573fa38cd3bb7ca0e2c0965290f458317e2988744b90bd1e29a43f04'
            '2ddaa3c6ff9490016becedf241b8522edcbcadc80f7652478270d94a12ac8ee9dc8f47ad7fd19f7fcc3f21f70a492ad5aab548370f3994c402bdb3c1d79373df'
            '5a2c76366eefd263f18f484ab3921cbb140c62d4636d1703523e329a3b893d4c310dd7bf0f04b9953313bc7c83fd4b3e562b4edd9bd09797b7e57d87d69dc6cc'
            'bdf5fbd0f7b674be9e4c5004d54bd91c7cc82f80b0ad2c534b62bd39b52b1ad6a2694bd645a208dcd1eb1e03e64d60e71bf605e096c69e497cdeda00534cbcc7'
            '274c592f48eba59dc1423ecd926859eb87fbb6ad3431415ed79bcfbaeae59a71d09669edfc4d217ec9ff39da42af21c8a55ceb4d6463c288d3c5f470b19184e8'
            'd9d28e02e964704ea96645a5107f8b65cae5f4fb4f537e224e5e3d087fd296cb770c29ac76e0ce95d173bc420ea87fb8f187d616672a60a0cae618b0ef15b8c8'
            'aeb7696d741aa281a4fb60931b58c4eb00aaf19682b851e06acf844ace8463de5e40682c5fc8f4cc9203e1dd37df3b7fd77606803eec8d27fcf0be80368de1ca'
            '456cb0c2b9b50318b156af7bc6de381fb9e7642b462cdaaa163374263fbcfa4d4ecdc8fb7212a9d548f12208e6d288f232192735a4b89669683c2fb99b293e6c'
            '42a27c351b9642a32202a421da631d729876a8c128da0721121bdf92c7f9a4b8324fdcbdf6082589f6007c3a7df713b1dba149f7c619174c4ba7f788af082227')

Pliki config:

config - http://wklej.org/id/1564746/

config.x86_64 - http://wklej.org/id/1564747/
Dell Inspiron 15-3542 (3542-2538) || Linux Register User: #536661
[AUR]  [GitHub]

sir_lucjan

  • AUR-OR
  • Administrator
  • Ekspert
  • *****
  • Wiadomości: 1327
  • Reputacja +11/-0
  • Nic nie działa, jak Polska cała!
    • Mój profil w AUR
  • Architektura: x86_64
  • DE/WM: Plasma 5
  • Distro: Arch Linux
  • GPU: Intel
  • Kernel: linux-bfq-haswell
Odp: linux-uksm w nowej, ulepszonej odsłonie
« Odpowiedź #3 dnia: Grudzień 22, 2014, 13:34:28 »
Przejąłem opiekę nad linux-uksm tak więc wszelkie poprawki umieszczone zostały w AUR.
Dell Inspiron 15-3542 (3542-2538) || Linux Register User: #536661
[AUR]  [GitHub]

 

Polityka cookies
Darmowe Fora | Darmowe Forum
killers polskibus cesarstwojaponii czarlit virtual-life